- Available for delivery anywhere in the mainland UK.
- Order for collection at Bagshot, Bybrook Barn or Shepperton.
- Returns Policy
Click here for more information on returning this product
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through
Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. Stir thoroughly, before and during use. Brush on product, evenly, along the grain.
Cuprinol Garden Shades will be touch dry in 1 hour under normal weather conditions. On areas subject to wear, such as garden furniture, allow a few days before heavy use or contact with soft furnishings.
Reseal can after use. Clean up spills while still wet. After use, remove as much product as possible from brushes before cleaning with water. Do not store or use in extremes of temperature and protect from frost.
Minimum of 2 coats required. Subsequent coats must be applied on the same day no longer than 8 hours apart. If not possible, lightly sand down surfaces before recoat to ensure adhesion. The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay.
Your Questions Answered
Be the first to submit a question, click the button to show the form.